KICKSTAND FOR LOWERED BAGGERS

KICKSTAND FOR LOWERED BAGGERS
Pingel Enterprise Kickstands for lowered 2014 FLs
With the newer Harley-Davidson’s and their taller seat heights, have you considered lowering the front and rear to get better handling with your bike? If you have, you need a kickstand that will work and keep your bike upright safely because the stock kickstand will lean the bike to the right too much and it will want to fall over. Pingel Enterprise, Inc. has designed 2 kickstand models for lowered bikes with a model for 1″ lowered front and rear bikes and one for 2″ lowered front and 1″ lowered rear bikes. These kickstands are handcrafted in the USA, made of steel, tig welded and beautifully hand polished and then chrome plated. They are designed to mount to the stock mount and will accept the stock spring. Unlike the stock H-D kickstand, these models have a large surface foot pad contact area to support the bike better on the ground. The kick tab is also easily accessible for use with stock and oversized primary covers. Pingel also has a stock replacement model which has a lesser lean angle to make it easier to get the heavy bike off its kickstand. These are designed for FLs only. They are designed specifically for 2007-2014 FLs. Also will fit years back to 1984, but lean angles may vary. Easy to install in approximately 15 minutes with common hand tools. Made in the USA. For all further information, please contact Pingel Enterprise Inc. at 608-339-7999 or at pingelonline.com